AUTONOMOUS WELDING-TECHNOLOGICAL COMPLEX ON THE BASIS OF GENERATOR ASSEMBLY "ASTK-3K"

Фото комплексу         The complex "ASTK-3K" is designed for execution of electroarc welding works, fusion and cutting in out-door conditions (see structural-functional diagram).

         The control and modes monitoring block of the complex provides execution of the following works:
         - arc welding by piece electrodes diameters from 2 up to 4 mm;
         - arc cutting of black metals with thickness up to 12 mm, with the compressor - up to 16 mm;
         - arc fusing (current up to 12 А); - power supply of the electrical tool.

TECHNICAL PROPERTIES
№
Parameter
Unit of meas.
Meaning
1
AC generator capacity
kVA
3,0
2
Welding current limits of regulation
A
50 - 150
3
Maximal current for cutting at DO=100%
A
130
4
Duration of operation:
- at welding by electrodes with diameters: 3,0/4,0 mm
- at cutting by electrodes with a diameter of 4,0 mm
%

70/40
40
5
Open circuit voltage of a welding source
V
32 - 38
6
 Accordance to norms on a EMC level
-
EN 50350
7
 Consumption of petrol (octane number - is not lower than the mark А-80)
l/hour
3,1-3,4
8
 Total weight (without compressor )
kg
86
Beginning | Production | Home | Price